| Bulleyes & Railings |
| Thursday, 06 July 2006 | |||||||||||||||||||||||
Bulleyes
I have two types of them 8 and 6mm but both are made the same way. I bought brass pipes with diameter 8 and 6 mm on outside and 7 and 5 mm on the inside accordingly. From that piece I cut 2 mm long sort of rings and place them in the wholes of deck house.
They look quite nice. I used brass because I will not paint inside parts of bulleyes. RailingsAll made from brass 1.2 and 1 mm. Top one is thicker. Rail supports are cut from 1x2 mm brass profile. I did not really have to solder each single support, only the edges. In the end it was easier to make than I expected. Rails will be painted.
|
|||||||||||||||||||||||
| Last Updated ( Monday, 06 November 2006 ) | |||||||||||||||||||||||
| < Prev | Next > |
|---|
