|
Thursday, 23. February 2006 |
|
trimmed plank glued to flat deck
Weeks have passed and ZENIT starts to have recognizable shape.
The deck - all know that decks are not flat. How to
bend piece of plywood so it remains oval across and rises in fore and
after decks? There are number of ways to do it, I chose the following:
|
|
Letzte Aktualisierung ( Monday, 6. November 2006 )
|
|
weiter …
|
|
|
Monday, 12. December 2005 |
|
So having collected all I could have had collected
with most indispensable set of tools i.e. computer, scanner, printer,
scissors and small saw I begun construction works.
To start with old drawings stated the scale 1:50
(1/4" = 1:48), but even without measuring one could have said that
something is wrong. Publisher simply printed the foils as they fit to
the layout without taking care of adjusting plans’ descriptions. On the
other hand what should I expect from drawings that must have been done
some when in 60s.
|
|
Letzte Aktualisierung ( Monday, 6. November 2006 )
|
|
weiter …
|
|
|
Tuesday, 22. November 2005 |
|
KID, met on modelling forum, sent those 3 pictures.
First 2 became invaluable during hull’s construction. I will explain
that later.
Andrzej Bryska, from the same forum, has sent me fantastic pictures of original "Zenit" from 1978 taken by instructor Edward Janczewski. See original Zenit in Photo Galleries section.
|
|
Letzte Aktualisierung ( Monday, 6. November 2006 )
|
|
weiter …
|
|
|
Monday, 7. November 2005 |
|
So one day I dug out whole set of already historical
"Modelarz" and "Plany Modelarskie" periodicals and started to browse
through drawings and plans. In the past I had in my mind the list of
ships I wanted to build one day…. ZENIT was also on that list. Finally
in Summer 2005 I started to work on the "keel".
|
|
Letzte Aktualisierung ( Monday, 6. November 2006 )
|
|
weiter …
|
|
|
<< Anfang < Vorherige 1 2 3 Nächste > Ende >>
|
| Ergebnisse 31 - 34 von 34 |
